Product overview
Ceramide EOP is a specialised skin-barrier lipid used in professional cosmetic formulation. It is particularly relevant to barrier-support and moisturising systems, including creams, lotions and lipid-rich treatments designed with a balanced ceramide, cholesterol and fatty-acid profile.
Key information
| INCI | Ceramide EOP |
|---|---|
| Ingredient type | Skin-barrier lipid / cosmetic active |
| Appearance | Refer to the batch-specific COA supplied with your order. |
| Solubility / dispersion | Generally difficult to dissolve in water and usually incorporated through a suitable heated oil phase or lipid premix; exact processing depends on the supplied grade. |
| Typical use level | Typically 0.05–0.5%; always follow the supplier’s technical specification and validate the finished formula. |
| Recommended pH | Usually suitable for mildly acidic to neutral cosmetic systems; confirm compatibility for the specific grade. |
Why formulate with Ceramide EOP
- Supports the development of barrier-focused creams, lotions, balms and other leave-on formulations.
- Can be combined with complementary barrier lipids such as Ceramide NP, cholesterol and suitable fatty acids, subject to formula compatibility.
- Useful for professional formulators developing moisturising and skin-comfort products.
How to incorporate into a cosmetic formula
- Confirm the exact supplier specification, carrier system and recommended processing temperature from the batch COA or technical data sheet.
- For an emulsion, pre-disperse or dissolve the ingredient in a suitable compatible oil-phase material or lipid premix. Ceramides may require gentle heating and thorough mixing; they are not generally suitable for simply sprinkling into a finished water phase.
- Add to the oil phase or lipid premix during manufacture, using the lowest practical temperature and sufficient mixing to achieve an even dispersion.
- Emulsify using a suitable emulsifier system. Check the finished formula for uniformity, stability, viscosity, odour and any crystallisation or precipitation during stability testing.
- Do not assume that a clear solution will form. The final appearance depends on purity, carrier, concentration, processing temperature and the complete formula.
Formulation notes
Barrier-lipid systems are highly formulation-dependent. Ceramides are commonly used at low concentrations and may perform best when combined with a suitable lipid blend rather than used alone. A small laboratory trial, compatibility check and stability assessment are recommended before production.
Safety and responsible use
- For use by trained or suitably experienced cosmetic formulators.
- Do not use neat, undiluted or directly on the skin.
- Do not use as a substitute for a finished, preserved cosmetic product.
- Use appropriate hygiene, protective equipment and accurate weighing procedures.
- The finished cosmetic product remains the formulator’s responsibility, including preservation, stability, safety assessment, labelling and UK/EU regulatory compliance.
Storage
Keep tightly closed in a cool, dry place away from direct sunlight, heat and moisture. Follow the storage conditions and shelf-life stated on the batch documentation. Allow the container to reach room temperature before opening if condensation could occur.
Technical documents
The applicable batch COA and SDS should be reviewed before use. If you require documents for a specific batch, please contact JustGlow with your order details.
Cosmetic ingredient only. This product is supplied for formulation use and is not intended to diagnose, treat, cure or prevent any disease.